This thread is a followup to my post over in the PRU section. Tl;Dr - latest stretch IOT image using 4.14.108-ti-r104 wouldn't enable the PRUs when I un-commented:
###pru_rproc (4.14.x-ti kernel) #uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo I attached a serial debug header and have managed to get the PRU overlays to load correctly and configure the PRUs by fudging uEnv.txt thus: ###Overide capes with eeprom uboot_overlay_addr0=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo However, this gives rise to the following problem: uboot_overlays: cape universal disabled, external cape enabled or detected... And I really need to use cape-universal. So, my questions: 1. How come the uBoot overlay for the PRU-RPROC support doesn't work? 2. How can I get uBoot to load the PRU-RPROC overlay and the overlay for cape-universal? Cheers all... -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/bf204599-1d40-4e7f-9267-b3e564e3ce84%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
