On Wed, May 22, 2019 at 12:59 PM Hugh Frater <[email protected]> wrote: > > Hi Robert, I'm no longer in front of the hardware for today but you can see > the output of version.sh on my thread over in the PRU section. You can also > see I tried zero-ing out the mmc in case that had a version of uboot that > didn't support overlays. Didn't make a difference.
So, it's actually working for me, that's why i'd like to see what the current output is.. might be the bootloader... Mine: ************* /opt/scripts/tools/version.sh git:/opt/scripts/:[c2a5ae96746d10d711c60bc84ba244f4cd7b75c3] eeprom:[A335BNLT0A5B2313BBBK3287] model:[TI_AM335x_BeagleBone_Black] dogtag:[BeagleBoard.org Debian Image 2018-06-24] bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2019.04-00002-g9ca2c5819f]:[location: dd MBR] kernel:[4.14.108-ti-r104] nodejs:[v6.17.0] uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[enable_uboot_cape_universal=1] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo] pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>] pkg:[bb-cape-overlays]:[4.4.20190429.0-0rcnee0~stretch+20190429] pkg:[bb-wl18xx-firmware]:[1.20190227.1-0rcnee0~stretch+20190227] pkg:[kmod]:[23-2rcnee1~stretch+20171005] pkg:[roboticscape]:[0.4.4-git20180608.0-0rcnee0~stretch+20180609]:[GOT_REPLACED_BY_NEXT] pkg:[librobotcontrol]:[1.0.4-git20190227.1-0rcnee0~stretch+20190327] pkg:[firmware-ti-connectivity]:[20180825+dfsg-1rcnee1~stretch+20181217] groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep admin spi tisdk weston-launch xenomai] cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0] dmesg | grep remote [ 2.686159] remoteproc remoteproc0: wkup_m3 is available [ 3.110587] remoteproc remoteproc0: powering up wkup_m3 [ 3.120022] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 [ 3.140239] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 11.555597] remoteproc remoteproc1: 4a334000.pru is available [ 11.647834] remoteproc remoteproc2: 4a338000.pru is available dmesg | grep pru [ 11.483643] pruss 4a300000.pruss: creating PRU cores and other child platform devices [ 11.555597] remoteproc remoteproc1: 4a334000.pru is available [ 11.593861] pru-rproc 4a334000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@34000 probed successfully [ 11.647834] remoteproc remoteproc2: 4a338000.pru is available [ 11.673978] pru-rproc 4a338000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@38000 probed successfully dmesg | grep pinctrl-single [ 0.912443] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 dmesg | grep gpio-of-helper [ 0.924804] gpio-of-helper ocp:cape-universal: ready lsusb Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub END **************** Your's: ******************* git:/opt/scripts/:[c2a5ae96746d10d711c60bc84ba244f4cd7b75c3] eeprom:[A335BNLT00C03816BBBK190D] model:[TI_AM335x_BeagleBone_Black] dogtag:[BeagleBoard.org Debian Image 2018-10-07] bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2018.09-00002-g0b54a51eee]:[location: dd MBR] kernel:[4.14.108-ti-r104] nodejs:[v6.14.4] uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[disable_uboot_overlay_emmc=1] uboot_overlay_options:[disable_uboot_overlay_video=1] uboot_overlay_options:[disable_uboot_overlay_audio=1] uboot_overlay_options:[disable_uboot_overlay_wireless=1] uboot_overlay_options:[disable_uboot_overlay_adc=1] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>] pkg:[bb-cape-overlays]:[4.4.20190429.0-0rcnee0~stretch+20190429] pkg:[bb-wl18xx-firmware]:[1.20180517-0rcnee0~stretch+20180517] pkg:[kmod]:[23-2rcnee1~stretch+20171005] pkg:[librobotcontrol]:[1.0.3-git20181005.0-0rcnee0~stretch+20181005] pkg:[firmware-ti-connectivity]:[20170823-1rcnee1~stretch+20180328] groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep admin spi tisdk weston-launch xenomai] cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] dmesg | grep remote [ 1.302485] remoteproc remoteproc0: wkup_m3 is available [ 1.389525] remoteproc remoteproc0: powering up wkup_m3 [ 1.389661] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 [ 1.393097] remoteproc remoteproc0: remote processor wkup_m3 is now up dmesg | grep pru dmesg | grep pinctrl-single [ 0.971911] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 dmesg | grep gpio-of-helper [ 0.984114] gpio-of-helper ocp:cape-universal: ready lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub END **************** One idea would be to udpate the bootloader.. sudo /opt/scripts/tools/developers/update_bootloader.sh Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYhRudWNH7wyKjZ9i8-d126fHmMtTW1L_Jj1sozUPzFWAw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
