Thank you Robert, I hope you receive this, as I must admit I'm having issues with the forums and can't seem to find where my post is located there.
After much searching, I was able to get the board functional using an overlay but would very much prefer to set it so that the it detects the correct configuration by default. I used this in the uEnv.txt file. enable_uboot_overlays=1 dtb_overlay=/lib/firmware/BB-BBBW-WL1835-00A0.dtbo Do you know how I can get it to detect the board as above without having to use the overlay? Thank you again. On Wed, Oct 23, 2019 at 11:05 AM Robert Nelson <[email protected]> wrote: > On Wed, Oct 23, 2019 at 10:00 AM <[email protected]> wrote: > > > > > > Ok, maybe I shouldn't have but I bough t a BBB wireless on ebay. I have > it up and running but I see no wlan0 interface but I do see an eth0. Could > someone have changed the eprom so this board thinks it is a regular BBB? > > > > version.sh shows this: > > > > eprom:[A335BNLTO > > model:[TI_AM335x_BeagleBone_Black] > > dogtag:[BeagleBoard.org Debian Image 2019-08-03 > > > GND TP1 and run this "one" line command: > > sudo dd if=/opt/scripts/device/bone/bbbw-eeprom.dump > of=/sys/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0050/eeprom > > ^that's "one" line... > > then run: > > sudo /opt/scripts/tools/version.sh | grep eeprom > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CACKSdcNjvrTz-oB6BaTpCNn9u6zxxaWLOaL%2B8hoU3T_G0tGdRg%40mail.gmail.com.
