On Wed, Oct 23, 2019 at 10:28 AM RJ Riemensnider <[email protected]> wrote: > > Here is the output, is this what was expected? > > fpp@FPP:~$ sudo dd if=/opt/scripts/device/bone/bbbw-eeprom.dump > of=/sys/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0050/eeprom > 0+1 records in > 0+1 records out > 28 bytes copied, 0.0054809 s, 5.1 kB/s > fpp@FPP:~$ sudo /opt/scripts/tools/version.sh | grep eeprom > Binary file (standard input) matches
Double check your gnd wire, eeprom has a write protect.. i forget where TP1 is located, but it should be labeled and you tie a gnd wire from the header to it.. You can reboot, but if it fails to boot, you can use this special blank image that'll boot any blank eeprom board: https://rcn-ee.net/rootfs/bb.org/testing/2019-10-21/stretch-iot/BBBL-blank-debian-9.11-iot-armhf-2019-10-21-4gb.img.xz Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjqs%3DqLZFEK%3DDwHBtm3mKEih1thpoyRFUg3HwVtivYQ9w%40mail.gmail.com.
