Is this better? fpp@FPP:~$ sudo dd if=/opt/scripts/device/bone/bbbw-eeprom.dump of=/sys/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0050/eeprom 0+1 records in 0+1 records out 28 bytes copied, 0.132348 s, 0.2 kB/s fpp@FPP:~$ sudo /opt/scripts/tools/version.sh | grep eeprom eeprom:[A335BNLTBWA50000BBWG*]
On Wed, Oct 23, 2019 at 11:35 AM Robert Nelson <[email protected]> wrote: > On Wed, Oct 23, 2019 at 10:28 AM RJ Riemensnider > <[email protected]> wrote: > > > > Here is the output, is this what was expected? > > > > fpp@FPP:~$ sudo dd if=/opt/scripts/device/bone/bbbw-eeprom.dump > of=/sys/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0050/eeprom > > 0+1 records in > > 0+1 records out > > 28 bytes copied, 0.0054809 s, 5.1 kB/s > > fpp@FPP:~$ sudo /opt/scripts/tools/version.sh | grep eeprom > > Binary file (standard input) matches > > Double check your gnd wire, eeprom has a write protect.. i forget > where TP1 is located, but it should be labeled and you tie a gnd wire > from the header to it.. > > You can reboot, but if it fails to boot, you can use this special > blank image that'll boot any blank eeprom board: > > > https://rcn-ee.net/rootfs/bb.org/testing/2019-10-21/stretch-iot/BBBL-blank-debian-9.11-iot-armhf-2019-10-21-4gb.img.xz > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CACKSdcOAvZ%2B4Ty3wOqJpz%3DyBLpK8_jt3KUNcyas7M0UTbr4vvQ%40mail.gmail.com.
