Pardon the newbie question. :) Will the serial cable allow me to debug a boot up? I don't have the drive on the bb showing on the computer. It only stays on for 10 seconds before shutting down.
On Wednesday, October 23, 2019 at 9:02:40 PM UTC-4, Michael B wrote: > > oh boy! > > Thanks for the info. It already shipped. Thankfully it wasn't expensive. > I held the boot button and booted up to see if I could boot off the card - > but oops again, I haven't disabled the flash to emcc yet as I can't get the > drive to show up. > Ahhhhh! It's still fun. :) > > Michael B > > > > On Wednesday, October 23, 2019 at 8:57:25 PM UTC-4, RobertCNelson wrote: >> >> On Wed, Oct 23, 2019 at 7:45 PM Michael B <[email protected]> wrote: >> > >> > Greetings all. Thanks for any advice and this fine group. >> > >> > I flashed my bb green wireless with the latest standard image. After >> flashing it powers on and looks normal for about 10 seconds and shuts down. >> > It isn't showing as a drive on my computer either as it used to. >> > I ordered a HDMI Cape so I can see what's happening. >> >> Cancel that HDMI cape order, it doesn't work past 4.4.x (no mainline >> driver) >> >> > >> > Does anyone have any helpful advice on what I can do while waiting for >> the Cape? >> >> Get a serial cable: >> >> https://elinux.org/Beagleboard:BeagleBone_Black_Serial >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6ed252f0-b40c-417c-80ef-87dbb70623a2%40googlegroups.com.
