The boot scrolls past and I can't grab it all. Using osx in terminal. If I put the micro sd into an adapter and plug into a computer it isn't mountable as it's a flash image of the bb that I am trying to get to run as opposed to a drive I can write to.
I tried to > screen to a file and the file came back empty. sudo screen /dev/tty.usbserial-FTAP7C79 115200 > session.txt Any advice on how to capture the boot in screen? On Monday, October 28, 2019 at 7:23:56 PM UTC-4, RobertCNelson wrote: > > On Mon, Oct 28, 2019 at 4:53 PM Michael B <[email protected] > <javascript:>> wrote: > > > > Some success in that I now have a serial cable connecting and can watch > the flashing and booting. > > I am still never getting the drive to show up as an external disk where > I can change the settings to not do a flash when a card is inserted. > > We don't do that... You need to stick the microSD card into a microSD > adapter and plug into another device.. > > > I am getting the error below. I googled a bit and it was suggested to > make sure you are on the latest image. > > I believe I have done that and re-flashed. Here is the error after > removing the card and booting: > > Thanks to all for the help. > > Michael B > > > > Error: [/dev/mmcblk1] does not exist > > writing to [/dev/mmcblk1] failed... > > [ 10.377724] Kernel panic - not syncing: Attempted to kill init! > exitcode=0x00000200 > > [ 10.377724] > > [ 10.386920] CPU: 0 PID: 1 Comm: init-eMMC-flash Not tainted > 4.4.9-ti-r25 #1 > > [ 10.393908] Hardware name: Generic AM33XX (Flattened Device Tree) > > [ 10.400066] [<c0015b61>] (unwind_backtrace) from [<c00123f5>] > (show_stack+0x11/0x14) > > [ 10.407858] [<c00123f5>] (show_stack) from [<c03c9023>] > (dump_stack+0x73/0x80) > > [ 10.415121] [<c03c9023>] (dump_stack) from [<c00f240d>] > (panic+0xbd/0x1e8) > > [ 10.422033] [<c00f240d>] (panic) from [<c00342dd>] > (do_exit+0x7d5/0x7f4) > > [ 10.428765] [<c00342dd>] (do_exit) from [<c0034355>] > (do_group_exit+0x2d/0x8c) > > [ 10.436019] [<c0034355>] (do_group_exit) from [<c00343c7>] > (SyS_exit_group+0x13/0x14) > > [ 10.443893] [<c00343c7>] (SyS_exit_group) from [<c000ec41>] > (ret_fast_syscall+0x1/0x52) > > [ 10.451942] ---[ end Kernel panic - not syncing: Attempted to kill > init! exitcode=0x00000200 > > [ 10.451942] > > [ 20.141509] random: nonblocking pool is initialized > > That looks like you flashed a "flasher" to the eMMC... > > Without any microSD plugged in, can you show us the full boot log from > power on, to that issue? > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8e605b35-1680-427e-abe4-7ca854193d4c%40googlegroups.com.
