I was able to grab a bit higher up than before.
It looks like it's trying to flash again even though the flash card isn't 
inserted.


-----------------------------
Starting eMMC Flasher from microSD media
Version: [1.20160606: run bb-wl18xx-wlan0 in single user mode...]
-----------------------------
Checking for Valid bbgw-eeprom header
Valid bbgw-eeprom header found [335]
-----------------------------
copying: [/dev/mmcblk0] -> [/dev/mmcblk1]
lsblk:
NAME         MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
mmcblk0boot0 179:8    0    2M  1 disk 
mmcblk0boot1 179:16   0    2M  1 disk 
mmcblk0      179:0    0  3.7G  0 disk 
`-mmcblk0p1  179:1    0  3.7G  0 part /
-----------------------------
df -h | grep rootfs:
-----------------------------
Error: [/dev/mmcblk1] does not exist
writing to [/dev/mmcblk1] failed...
[   10.593743] Kernel panic - not syncing: Attempted to kill init! 
exitcode=0x00000200
[   10.593743] 
[   10.602937] CPU: 0 PID: 1 Comm: init-eMMC-flash Not tainted 4.4.9-ti-r25 
#1
[   10.609926] Hardware name: Generic AM33XX (Flattened Device Tree)
[   10.616083] [<c0015b61>] (unwind_backtrace) from [<c00123f5>] 
(show_stack+0x11/0x14)
[   10.623875] [<c00123f5>] (show_stack) from [<c03c9023>] 
(dump_stack+0x73/0x80)
[   10.631138] [<c03c9023>] (dump_stack) from [<c00f240d>] 
(panic+0xbd/0x1e8)
[   10.638050] [<c00f240d>] (panic) from [<c00342dd>] (do_exit+0x7d5/0x7f4)
[   10.644782] [<c00342dd>] (do_exit) from [<c0034355>] 
(do_group_exit+0x2d/0x8c)
[   10.652036] [<c0034355>] (do_group_exit) from [<c00343c7>] 
(SyS_exit_group+0x13/0x14)
[   10.659910] [<c00343c7>] (SyS_exit_group) from [<c000ec41>] 
(ret_fast_syscall+0x1/0x52)
[   10.667960] ---[ end Kernel panic - not syncing: Attempted to kill init! 
exitcode=0x00000200
[   10.667960] 
[   20.097528] random: nonblocking pool is initialized




-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/a2facbdd-3e53-4240-b146-486d7091b565%40googlegroups.com.

Reply via email to