I have been using BBB with QNX, booted from the SD Card. The SD Card is
FAT32 formated with the following files
MLO, u-boot, uEnv & qnx-ifs. I have been running many applications
without problem..
I wanted to port QNX to eMMC so that by default it boots from the eMMC
so that SD card can be avoided. Hence, the followed the steps as below
1. After QNX boot, I created a partition (fdisk)
2. Formatted the eMMC to fat32 (mkdosfs),
3. Mounted it.
4. Copied the above four files to eMMC
All these were successful. Verified using df & ls command. Then restarted.
Now, the BBB is neither booting from eMMC nor from SD-card. It gives out
"CCCCC" on Serial output. However, the same SD card used in another BBB is
booting fine with QNX.
How do I get the BBB booting?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/672a5547-f3a8-4582-b5c6-e8248869b934%40googlegroups.com.
