On Mon, 28 Oct 2019 02:11:11 -0700 (PDT), in
gmane.comp.hardware.beagleboard.user Geetha
<[email protected]> wrote:
>Now, the BBB is neither booting from eMMC nor from SD-card. It gives out
>"CCCCC" on Serial output. However, the same SD card used in another BBB is
>booting fine with QNX.
>
>How do I get the BBB booting?
Will it boot from SD card if you are holding down the boot-select
button when applying power?
If not, I suspect it was relying upon initially loading u-Boot from the
eMMC and then transferring control to the SD card rather than using the
u-Boot on the card -- and you've wiped the initial u-Boot.
Try creating a Debian flasher image (and again you might need the
boot-select button) to restore the eMMC with a valid u-Boot.
--
Dennis L Bieber
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/657erepqctf2rd8el0sbe5bfr26q33dvee%404ax.com.
