Thanks for your response. Boot select button is having no effect...
U-boot is a valid one, since the card has booted from it without any issue from SD-Card... Any other suggestions? Thanks --Geetha On Monday, October 28, 2019 at 10:26:32 PM UTC+5:30, Dennis Bieber wrote: > > On Mon, 28 Oct 2019 02:11:11 -0700 (PDT), in > gmane.comp.hardware.beagleboard.user Geetha > <[email protected] <javascript:>> > wrote: > > > >Now, the BBB is neither booting from eMMC nor from SD-card. It gives out > >"CCCCC" on Serial output. However, the same SD card used in another BBB > is > >booting fine with QNX. > > > >How do I get the BBB booting? > > Will it boot from SD card if you are holding down the boot-select > button when applying power? > > If not, I suspect it was relying upon initially loading u-Boot > from the > eMMC and then transferring control to the SD card rather than using the > u-Boot on the card -- and you've wiped the initial u-Boot. > > Try creating a Debian flasher image (and again you might need the > boot-select button) to restore the eMMC with a valid u-Boot. > -- > Dennis L Bieber > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/49d542e2-a777-44ca-8f25-71890ac9c440%40googlegroups.com.
