Hi everyone, i have an old Beaglebone Black (short after it was released) and now i got a new BBAI. The BBB i could run with a mainline kernel and mainline u-boot and a stock Debian/armhf.
I build u-boot from source and rest was qemu-debootstraped. For other SBC's like the Pi4 there is a description how exactly the bootprocess works. Also the BBB got a description how to setup the SD card to boot it. My first try was to setup the SD card as i did with the BBB but it didn't work out. When i flash the Flasher Image i can restore my MMC and it works again. Even if i copy the content of the original MMC to the SD card it works. I got a TTL UART adapter and i can see u-boot and work with it on the stock images. My interest is in understanding the boot sequences of these SBCs and run them most of the time with Debian and upstream sources. Could you point me to a description of the boot sequence? The offical system manual is still on TODO in these areas. Thanks! Georg -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2624f1f2-ec08-471c-b8ae-ffd48f1fca42n%40googlegroups.com.