https://beaglev.seeed.cc/
seems to say that
All GPIOs can be configured to different functions including but
not limited to SDIO, Audio, SPI, I2C, UART and PWM
so it seems it can handle your application
On 1/13/2021 6:39 AM, [email protected] wrote:
I got a mail message from seeed that introduced the BeagleV.
Although I am very hopeful for a complete opensource hardware and
software platform, I noticed that the pin-layout and the compatibility
of the ARM-Beagleboards has been abandoned.
I also noticed on the specs that the GPIO pins could be used for any
kind of communication protocol, be it UART, SPI, SDIO etc.
I am currently using 3 UART ports on a BeagleBone to communicate with
some peripherals.
Would that still be possible in the new design?
I also noted the RS485, or Canbus was not described in the IO.
Can anyone involved in the design comment on these observations?
(Why abandon the old pin layout, how to implement three UARTS or 2
I2C's, and why no CANBus availability)
Kind Regards
Johan Henselmans
--
For more options, visit http://beagleboard.org/discuss
<http://beagleboard.org/discuss>
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/3cc933a3-b647-4fe4-b24b-9ba03c478f1fn%40googlegroups.com
<https://groups.google.com/d/msgid/beagleboard/3cc933a3-b647-4fe4-b24b-9ba03c478f1fn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/51cfd21f-9f45-cf24-a4e5-a14b943835d9%40gmail.com.
