I have the same question as you Daniel, the PRU in my opinion is one of the most killer feature of beaglebone and I'm already using BBAI Pru and the 4 PRU's on AI is extremely welcome. Jason, any chance to have PRU with this revision 2 BBAI board?
Em qua., 13 de jan. de 2021 às 20:38, Daniel Kulp <[email protected]> escreveu: > The TDA4VM doesn't have PRU's. Does that mean use of PRU's is now > "deprecated" and discouraged? > > Dan > > > On Wednesday, January 13, 2021 at 1:43:02 PM UTC-5 Jason Kridner wrote: > >> BeagleV is something new in addition to BeagleBoard and BeagleBone >> offerings from BeagleBoard.org. It is meant to address the needs coming >> from the RISC-V community for a low-cost development board, ultimately with >> a path to production. We still have a roadmap for BeagleBone! >> >> So, I'll share what I should have shared before, but am still ironing out >> details on schedule as we are executing this... >> >> There's a minor tweak to BeagleBone AI rev A1a to rev A2, but I'm not >> sure if it'll go into full production as we have started a rev B with the >> TDA4VM device from TI. It jumps to A72s and has better software support for >> the AI accelerators. >> >> One project I'm most excited about is an update to BeagleBone Blue (rev >> C, rev B used the smaller SIP but had unrelated issues that never got >> resolved and therefore never got released). I need some more stuff to be >> released from TI to share more details there, but the motor drive >> capability will be boosted to enable direct drive of BLDC quadrotors and >> 3-phase steppers. >> >> And, I'm very, very excited about BeagleConnect technology being worked >> on at https://github.com/jadonk/beagleconnect based on TI CC1352. This >> still has a long way to productize, but it is really interesting tech! >> >> We also have some cool stuff being worked by BeagleBoard Compatible >> makers in the BeagleBone space. For that matter, SeeedStudio BeagleBone >> Green Gateway hasn't been out very long. >> >> Anyway, the short answer is BeagleV an in-addition-to-BeagleBone thing, >> not moving away from it. >> >> If interested in BeagleV, please register your interest at BeagleV.org. >> If you already did so with Seeed, no need to replicate. >> >> On Wed, Jan 13, 2021 at 8:39 AM [email protected] < >> [email protected]> wrote: >> >>> >>> I got a mail message from seeed that introduced the BeagleV. >>> >>> Although I am very hopeful for a complete opensource hardware and >>> software platform, I noticed that the pin-layout and the compatibility of >>> the ARM-Beagleboards has been abandoned. >>> >>> I also noticed on the specs that the GPIO pins could be used for any >>> kind of communication protocol, be it UART, SPI, SDIO etc. >>> >>> I am currently using 3 UART ports on a BeagleBone to communicate with >>> some peripherals. >>> >>> Would that still be possible in the new design? >>> >>> I also noted the RS485, or Canbus was not described in the IO. >>> >>> Can anyone involved in the design comment on these observations? >>> (Why abandon the old pin layout, how to implement three UARTS or 2 >>> I2C's, and why no CANBus availability) >>> >>> Kind Regards >>> Johan Henselmans >>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/beagleboard/3cc933a3-b647-4fe4-b24b-9ba03c478f1fn%40googlegroups.com >>> <https://groups.google.com/d/msgid/beagleboard/3cc933a3-b647-4fe4-b24b-9ba03c478f1fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> >> >> -- >> https://beagleboard.org/about/jkridner - a 501c3 non-profit educating >> around open hardware computing >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/63df07cc-33ac-4be3-8860-93111ccdf3c3n%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/63df07cc-33ac-4be3-8860-93111ccdf3c3n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAB6xwCp24LzZ6P08-P3cLDnrV6it8hvVGKYR4p7cwK7vRvyFjg%40mail.gmail.com.
