Looks like everyone is talking about it even Jason: https://www.youtube.com/watch?v=9MJl7gCTAcM
https://www.tomshardware.com/news/beaglev-riscv-announced https://blog.adafruit.com/2021/01/13/the-risc-v-powered-beaglev-board-announced-riscv-beagleboardorg/ https://arstechnica.com/gadgets/2021/01/seeed-and-beagleboard-team-up-to-provide-a-new-risc-v-based-linux-pc/ Jon On Wed, Jan 13, 2021 at 7:05 AM jonnymo <[email protected]> wrote: > This looks like another effort to use a RISC-V processor on a board so it > will be different than an ARM core. > > Jon > > On Wednesday, January 13, 2021, [email protected] < > [email protected]> wrote: > >> >> I got a mail message from seeed that introduced the BeagleV. >> >> Although I am very hopeful for a complete opensource hardware and >> software platform, I noticed that the pin-layout and the compatibility of >> the ARM-Beagleboards has been abandoned. >> >> I also noticed on the specs that the GPIO pins could be used for any kind >> of communication protocol, be it UART, SPI, SDIO etc. >> >> I am currently using 3 UART ports on a BeagleBone to communicate with >> some peripherals. >> >> Would that still be possible in the new design? >> >> I also noted the RS485, or Canbus was not described in the IO. >> >> Can anyone involved in the design comment on these observations? >> (Why abandon the old pin layout, how to implement three UARTS or 2 I2C's, >> and why no CANBus availability) >> >> Kind Regards >> Johan Henselmans >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/3cc933a3-b647-4fe4-b24b-9ba03c478f1fn%40googlegroups.com >> <https://groups.google.com/d/msgid/beagleboard/3cc933a3-b647-4fe4-b24b-9ba03c478f1fn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkrNutEb4xgn6Uf6TMHsuwP2mGONEm9ur1j5jJSXdMfi8w%40mail.gmail.com.
