On Mon, 5 Jul 2021 13:34:17 +0530, in gmane.comp.hardware.beagleboard.user
Vinayakumar Chikkadi <vinayvkc-re5jqeeqqe8avxtiumw...@public.gmane.org>
wrote:
>The pin positions for 5v, gnd, Rx, Tx on cable are not matching with J1
>header on bbb.
>
5V is a danger already... A Raspberry-Pi serial<>USB (came with a
Sparkfun Pi-Wedge) runs
DTR Rx Tx 3.3V CTS GND
Which is NOT compatible with BBB (the Rx and Tx are swapped).
https://elinux.org/Beagleboard:BeagleBone_Black_Serial
"The debug cable is a standard FTDI to TTL cable. Make sure you get the
3.3V version."
Personally, the AdaFruit cable is probably more flexible as the four pins
are free to connect anywhere, not tied to a specific sequence in one
header.
--
Dennis L Bieber
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/7de6egl8q3n7cc5h8ej7mtsnafm6dmvutt%404ax.com.
