I can give a few more details on my setup and procedure. I ran this on a brand new, never configured SBR.
Network: 192.168.1.* Subnet Mask: 255.255.255.0 Router running on 192.168.1.101 - Linksys WRT54GL running Sveasoft Taliman/Mesh - serving DHCP in range 192.168.1.150-190 SC 7.3 running on 192.168.1.3 - Linux FC6 WinXP SP3 with Cygwin running on 192.168.1.2 - perl and subversion both installed - Net_UDAP downloaded according to instructions on Robin's web site SBC powered on (just to prove you can do this with a Controller in the mix) Procedure - Bring up Cygwin shell on XP box - SBR connected to router with ethernet cable & powered on - Run Net_UDAP according to instructions on Robin's web site - Run the following (as described on Robin's web site) discover (had to run this a couple times before it saw the SBR) conf 1 set interface=1 save_data reset - Wait until LED turns blue, then continue (as described on Robin's web site) discover conf 1 set squeezecenter_address=192.168.1.3 save_data - Wait until LED turns white (it flashed white for a few moments) Bring up SC Settings page (Information tab) in browser window and confirm new SBR is there. I also saw it go from firmware v18 to v54. To verify repeatability, I did a hard reset of the SBR (hold in button until red light flashes quickly), cycled power, and did the whole procedure one more time. FWIW, I've also attached a screen capture of my Net_UDAP session. Hope this helps. Good luck! Mark +-------------------------------------------------------------------+ |Filename: sbr-session.txt | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=6354| +-------------------------------------------------------------------+ -- mhilbush ------------------------------------------------------------------------ mhilbush's Profile: http://forums.slimdevices.com/member.php?userid=16832 View this thread: http://forums.slimdevices.com/showthread.php?t=43722 _______________________________________________ beta mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/beta
