tonyptony;366937 Wrote: > Well, I don't know what happened but tonight I can find the Receiver > with udap_shell. I followed Felix's procedure but after Reset I'm still > at the blinking Red light.I would try it again to see if you can get to the > blue light...
> If I'm going to use the Receiver exclusively without a Controller and > over wired Ethernet, what should the Bridging value be set to? "0" > Also, it seemed to automatically pick up my SC IP address when I looked > at the "list", which surprised me. Sort of surprises me too, but I'm > certainly no expert. > What should the lan_network_address be set to? Right now it automaticaly > set itself to the IP address of my SB3, which does seem right to me. I believe this should be the address issued by your router via DHCP for the receiver, every device should have it's own address. I don't think it should have the address of your SB3. When you look in SqueezeCenter are both players listed in the drop-down? > Should lan_gateway and primary_dns be the same address if I didn't do > anything tricky in my router setup? As long as it's the address of your router it should work, I'm not network savvy enough to know if that's optimal or not. Meaning, I don't know if it will work any better if you entered your ISP's actual DNS addreses there. I followed Felix's instructions as well and just those instructions and everything is working fine, out of curiosity I'll have to go in and look at the other settings some time. A thought just occurred to me, based on the info you've given and if you left your SB3 connected, I would almost be willing to bet money that you were actually looking at the SB3 and not the receiver. In NetUdap type (without quotes) "discover" after that type (without quotes) "list" Does it see both devices? If the SB3 is listed as device #1 you should probably disconnect your SB3 while trying to config the SBR or change all the command references to device #2 i.e. -conf 2- More info and a reference for what the different fields represent ' HERE...' (http://projects.robinbowes.com/Net-UDAP/trac) -- Merlinwerks ------------------------------------------------------------------------ Merlinwerks's Profile: http://forums.slimdevices.com/member.php?userid=20433 View this thread: http://forums.slimdevices.com/showthread.php?t=43722 _______________________________________________ beta mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/beta
