Mike, thank you. I had missed that particular post when ordering from Amazon.
Now that I have it all compiled in and listed in my dmesg, I'm still needing some additional deep assistance on this one. With the serial cable from my lfs machine to a windows machine, I get NOTHING over that /dev/ttyUSB0 serial port. Take the cable off, move it from lfs to a windows laptop and off we go. There are no error messages, there is a delay of a bit long, but it comes back, after a dmseg > /dev/ttyUSB0 I installed Minicom and configured it to match that of the windows hyperterminal session 115200 8n1 with hardware flow control. lsmod shows the module loaded pl2330. At a loss here. Alan -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
