On 4.8.2012 22:39, Tobias Gasser wrote: > Am 04.08.2012 20:57, schrieb Armin K.: > >> As the log says, you should've attached dmesg output. > as the system hangs there is no way to get dmesg output - at least no > way i know about... > > btw: > trak-error "page xorg-intel-driver not found" > >
http://wiki.linuxfromscratch.org/blfs/ticket/3483 >> I am unsure if you have HD3000 (Sandybridge) or HD4000 (Ivybridge) >> graphics. If you have the latter, then I guess update can solve it, >> since I've seen some 2D and 3D improvements in DDX and Mesa for that >> chipset. If you have the former one, then something might be wrong on >> your setup or the driver itself. I have HD3000 and it works with driver >> versions from the book. You can try using SNA when building intel driver >> and see if the problem remains. > > i7-2600 is sandybridge with HD2000 > > i'll try --enable-sna tomorrow (it's now 22:40 here in CH) and report > the result. > > thanks for your help > tobias > Good. You could try new libdrm and xorg intel driver, but be aware that MesaLib can't be built if using default BLFS instructions if you upgrade libdrm. You'll have to disable nouveau in order to use new libdrm with MesaLib 8.0. -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
