Have you tried contacting the author of the program for help? I have
restored images to new, larger hard drives and it has worked fine for me. I
did do it from an image that was on an external HD, using the Image for DOS
boot CD and I had sighted assistance. But the restore did work and the new
partition was automatically resized to fill the new, larger HD.
John
----- Original Message -----
From: "Alan & Terrie Robbins" <[email protected]>
To: <[email protected]>
Sent: Thursday, October 08, 2009 9:44 AM
Subject: Re: [Blind-Computing] Image restore quandary
David,
After doing some research yesterday, I believe the source of
the conflict is in having multiple physical disk drives in
the machine I set the new image up in and then burned it. As
you know, the BIOS assigns drive #'s and in my case the are
0 & 1. My suspicion is that when I go to restore the image
it is looking for a device numbered the same as on the
image. That may or may not be so. I consistently get the
same message "target device not found, press enter to
reboot." I'm wondering if the sightless restore of this
program is limited to only restoring the image on the same
physical drive it was created from? This has good utility in
the event one's system gets screwed up and one wants to
simply lay down the unadulterated image again. However, I'm
not sure of the program's utility in terms of laying down
the image on a different or newly purchased hard drive? Have
you had success with this? Regarding your suggestions below,
the format of the drive I don't think that would matter as
all info is erased and the image then is put down. The
format will be that of what the image is. The hard drive is
the same brand but different size. I've played with many
options, even installing the image from the DVD onto the
extra drive while system is up and running. It installs the
image ok, but when the hard drive is removed and put into
the other computer, the system won't boot. Keep the ideas
coming and I'll keep researching
thanks,
Al
-----Original Message-----
From: [email protected]
[mailto:[email protected]]on Behalf Of
David Ferrin
Sent: Thursday, October 08, 2009 12:10 AM
To: [email protected]
Subject: Re: [Blind-Computing] Image restore quandary
Is the new drive formatted the same way as the old drive
was? Also is it the
same type of drive?
David Ferrin
www.jaws-users.com
VIP Conduit Tech Support
www.vipconduit.com
----- Original Message -----
From: "Alan & Terrie Robbins" <[email protected]>
To: <[email protected]>
Sent: Tuesday, October 06, 2009 5:29 PM
Subject: Re: [Blind-Computing] Image restore quandary
David,
Thanks, I'll spare you the long version (ha, ha). A simple
way to sum all this up would be say I have a good image on a
DVD and my current hard drive bites the dust. I go to the
store and buy a new one. I partition it an put it in the
machine and attempt to lay down the image on it and get what
I described to you at the end of the message. Suggestions?
Al
-----Original Message-----
From: [email protected]
[mailto:[email protected]]on Behalf Of
David Ferrin
Sent: Tuesday, October 06, 2009 5:10 PM
To: [email protected]
Subject: Re: [Blind-Computing] Image restore quandary
Al all I can say is if this is a brief description please
don't give me the
long version because I will have to read it very carefully
before even
having a chance of grasping a handle on what you ultimately
ended up with.
Confused in Pennsylvania. I'll review it further.
David Ferrin
www.jaws-users.com
VIP Conduit Tech Support
www.vipconduit.com
----- Original Message -----
From: "Alan & Terrie Robbins" <[email protected]>
To: "Blind-Computing" <[email protected]>
Sent: Tuesday, October 06, 2009 4:30 PM
Subject: [Blind-Computing] Image restore quandary
Well the subject says it all. I will try to be as brief
below as possible to explain my dilemma and hopefully find a
simple answer that I am obviously overlooking.
About a month ago I purchased Image For Windows and am
thrilled with the program. I have successfully created and
restored two different images with no problem. Here is my
current dilemma.
I have two Acer computers. I'll call them Intel and A M D so
as to not confuse them in the below dialogue I'm describing.
My primary in home networked computer was the Intel. The A M
D computer as well as my wife's worked off this Intel unit.
The computer had not been re formatted for about a year and
a half and I also wanted to swap it out for the A M D
machine which has a faster processor and twice the memory. I
know the hours it can take to set a computer up from
scratch so I figured I would simply take the hard drive out
of the A M D computer and use it to set up the Intel
computer as time permitted. The first thing I did was to use
the Image for Windows program to create an image of the A M
D computer. I then restored that image to confirm it worked
prior to taking the hard drive out and using it in the Intel
machine. I also created an image of the Intel machine before
doing anything just in case something went amuck. I then
unplugged the Intel hard drive and plugged the A M D one
into that unit. I got the factory restore disks out for the
Intel computer and installed them on the A M D hard drive
which was now temporarily in the Intel unit. This erased all
data on the A M D hard drive and created the factory image
of the Intel computer. Everything worked well and I
installed JAWS, a few other key programs I wanted and then
burned a new image with image for windows to use a starting
point from now on with the Intel computer so I did not need
to take hours setting it up from scratch again. I then
removed the A M D hard drive from the Intel computer and
plugged the Intel one back in. The Intel computer booted up
fine and picked up from where it left off prior to switching
hard drives. I then took the A M D hard drive and put it
back in the A M D machine and put the original A M D image I
had created prior to starting this project back on it. The A
M d computer booted up fine (Just like David said it would)
and it was if nothing had ever changed. Now, for the
dilemma. I wanted to put the new image I created on the
Intel machine on the Intel hard drive to in essence have a
new, freshly formatted computer. The image will not go on
that hard drive. What happens is I put the initial disk in
the it boots just like it is supposed to. The tray comes out
and asks for the last disk of the set. I put that in, the
DVD whirs for a minute and then the tray comes out and asks
for the first disk again. When I put this back in I do not
get the dialogue asking for the Y or N to proceed and put
that image on the hard drive. It goes back to a basic
screen saying boot device cannot be found, press enter to
continue. When I do this the same process repeats but I
never can get anywhere. I thought there may be something
wrong with the Intel machine so I took the hard drive out
and put it in the A M D machine (unplugging the A M D hard
drives) to try on that machine which I know works and same
thing happened. I have even deleted all partitions on the
Intel hard drive and created and formatted new ones to
emulate a new hard drive and same out come as above. Anyone
have a solution as to how I can get the image I made with
image for windows on that Intel hard drive?
thanks
Al
For answers to frequently asked questions about this list
visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list
visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list
visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list
visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
