Rob, yeah, that's what I'll do. But, I need to know what size bolts to use, so have to measure the o/d of the holes in the mounting plate of the vise.
Bill Stephan Kansas City, MO (816)803-2469 William Stephan -----Original Message----- From: "Rob Monitor"<[EMAIL PROTECTED]> Sent: 11/16/06 12:34:40 PM To: "[email protected]"<[email protected]> Subject: Re: [BlindHandyMan] Measuring inside diameters hi, Can't you just use a al or some thing and mark where the holes go by sitting the vice on the bench or what ever you are going to mount it on and just use the al and mark the holds??? ----- Original Message ----- From: William Stephan To: [email protected] Sent: Thursday, November 16, 2006 12:20 PM Subject: [BlindHandyMan] Measuring inside diameters I just received what looks to be a pretty nice vise from Harbor Freight. The manual was so detailed in how to operate a vise it was sort of humorous. They failed though to mention the right size bolts to use to mount the thing, which would have been more useful than say knowing that you turned the handle clockwise to tighten. Anyway, I plan on using my trusty drill index to measure, but was wondering if any of you had a better suggestion that doesn't cost an arm and a leg. Thanks in advance. Bill Stephan Kansas City, MO (816)803-2469 William Stephan [Non-text portions of this message have been removed]
