YAW, Just after I sent that e-mail I looked at your message and
relies how dumb I must sound... Just one of those days...
ROB
----- Original Message -----
From: William Stephan
To: [email protected]
Sent: Thursday, November 16, 2006 1:26 PM
Subject: Re: [BlindHandyMan] Measuring inside diameters
Rob, yeah, that's what I'll do. But, I need to know what size bolts to use,
so have to measure the o/d of the holes in the mounting plate of the vise.
Bill Stephan
Kansas City, MO
(816)803-2469
William Stephan
-----Original Message-----
From: "Rob Monitor"<[EMAIL PROTECTED]>
Sent: 11/16/06 12:34:40 PM
To: "[email protected]"<[email protected]>
Subject: Re: [BlindHandyMan] Measuring inside diameters
hi, Can't you just use a al or some thing and mark where the holes go by
sitting the vice on the bench or what ever you are going to mount it on and
just use the al and mark the holds???
----- Original Message -----
From: William Stephan
To: [email protected]
Sent: Thursday, November 16, 2006 12:20 PM
Subject: [BlindHandyMan] Measuring inside diameters
I just received what looks to be a pretty nice vise from Harbor Freight. The
manual was so detailed in how to operate a vise it was sort of humorous. They
failed though to mention the right size bolts to use to mount the thing, which
would have been more useful than say knowing that you turned the handle
clockwise to tighten.
Anyway, I plan on using my trusty drill index to measure, but was wondering
if any of you had a better suggestion that doesn't cost an arm and a leg.
Thanks in advance.
Bill Stephan
Kansas City, MO
(816)803-2469
William Stephan
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
