I don't know if this will work but it is worth a try. If the bolt is loose as apposed to there being a lot of friction or corrosion. I would find a magnet like the telescoping kind you might find in an auto parts store, and then I would try to slowly turn the bolt out using the magnet like a screw driver. You may need to be very patient. Also , and you will need to be careful with this idea, put a dot of some aggressive adhesive like gorilla glue or super glue, on the end of a small dowel or some thing like that and basically weld it to what is left of the bolt, when it is sufficiently dry turn it out taking care not to brake the weld you made. HTH
-----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of Robert Riddle Sent: Wednesday, June 11, 2008 6:00 PM To: [email protected] Subject: [BlindHandyMan] broken bolt I've got a broken chair here. Made of metal. One of the bolts holding the back of the chair to the frame broke off, leaving a small portion of the end of the bolt in the hole. It doesn't stick out, so I can't get a grip on it. Any suggestions on getting this little piece out so I can fit a new bolt in? [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
