Stephen, That is the beauty of it. my circle cutters all have a center pilot hole. When I first cut the circles I can put a bolt through them and fasten into the drill press for sanding or shaping. Then the center hole will align the stock for cutting the inside circle which will later become the coasters. I probably will have to make a third cut to cut them to the correct size. And I will need a forstner bit to actually make the coaster. As far as the hole in the coaster years ago at a craft show Karen picked up a set of square coasters that stack on a rod. I also could use a smaller forstner bit and make plugs. The wine bucket that I have stands about 7 1/2 inches tall. Other than cutting some blocks most of the work will be done on the drill press.When assembled I can use the bolt to hold it upside down for some final sanding. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, June 13, 2008 5:34 PM Subject: Re: [BlindHandyMan] wine bucket
Lenny: I'll be interested in what folks have to say about the insolation factor, but it sounds like a fun project. Aren't you though, going to have to drill holes in those remaining circles you're going to use as coasters in order to fit them on the rod for storage, and will they still work effectively with a hole in the center? ------------------------------------ Send any questions regarding list management to: [EMAIL PROTECTED] To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/[email protected]/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Groups Links __________ NOD32 3186 (20080613) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com
