Hi Don and Lee, Now you guys really got my curiosity. I pictured struggling with a 250 length of the material that you had to pull through each hole. It has been years since I saw a caned chair but always thought that there was only one long strand woven. If a lot of short strands are used how do you keep them from pulling back out of the holes? ----- Original Message ----- From: "Don" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, November 14, 2008 6:49 PM Subject: Re: [BlindHandyMan] caning and repairing chairs
Yep, Lea, rolling up the strands of cane, close pinning, them and soaking in water, I have done a few, my self. I had a clean new large mop bucket that I soaked the cane in. I would soak the amount I figured I would use that day. I have never tried the plastic cane. I would think it would be really different working with, since it would not shrink. I all so did some rush weave caning with the paper cane. Talk later. Don ----- Original Message ----- From: Lee A. Stone To: [email protected] Sent: Friday, November 14, 2008 4:52 PM Subject: Re: [BlindHandyMan] caning and repairing chairs Don, as Mom cut and measured the strands for each chair my bother Geno and I would roll the wooden cane and then clip with a clothespin and put to soak in the bathroom sink. However in the early spring that water would turn near brownish red with copper the we would melt snow to soak the strands in. Let me also add if you evr have a chance to work with plastic cane. it is beautiful w to work with but you should tell your customer there is no guarntee. plastic wil lsplit and crack much easier than regular cane . plastic is apparently eaiser to rip should someone sit for instance with a truckers wallet that had a chain hooked to it and other things. . so again plastic cane is beautiful 5to look at and to work with but if you want a customer to return then tell them up front. thanks.Lee On Fri, Nov 14, 2008 at 04:40:41PM -0600, Don wrote: > Wow Lea, that's pretty amazing your Mother doing some chair caning. It would have really been tuff back then, with the little it paid, expectly for the hours she would have put in to it. That's the thing about caning, it is really time consuming. Great story. Don > ----- Original Message ----- > From: Lee A. Stone > To: [email protected] > Sent: Friday, November 14, 2008 8:53 AM > Subject: Re: [BlindHandyMan] caning and repairing chairs > > > > believe it or not, ask a local Sscouting group. 4 H group. if there > is someone teaching this old profession. You see as long as folks > collect old furnature and as long as most folks are to busy to do > this chorse at times then the work will be there. Our mothr helped > raise 8 kids on the money she made doing chairs and seats as well as > sewing. that is another craft. being a seamstress which is fading > away. Lee > > On Fri, Nov 14, 2008 at > 09:22:50AM > -0500, NLG wrote: > > Where is a good place to learn the art of caneing? I see some basic instruction in my cursory search on the subject but didn't completely understand it. For instance, after you run the cane from front to back, when running the cane from side to side does it go over all the ones running front to back or do you weave it over and under? Any titles of recorded books, internet web sites, or pod casts would be appreciated. > > > > > > ----- Original Message ----- > > From: Lee A. Stone > > To: Blind Handyman > > Sent: Friday, November 14, 2008 08:55 > > Subject: [BlindHandyMan] caning and repairing chairs > > > > > > > > > > Kevin just said he is getting $1.00 per hole and when we first started > > in the late 50's we were at 15 cents a hole and when I left home in 66 > > Mom was getting 26 cents a hole. The point I would like to make if one > > has the ability to use your hands and think. you might not get rich but > > you could make some money not only caneing but repairing older > > furniture. You might need some sighted help to scout out and find some > > deals on chairs of different kinds but the money is out there as is > > the ability to apply the skills as a blind handyman or handywoman. > > Then you toss in some learned skills at your ability to haggle on price > > and work that you would be willing to take in. Lee > > > > -- > > The goal of science is to build better mousetraps. The goal of nature > > is to build better mice. > > Come and chat with me at #quietzone on irc.newnet.net > > > > > > > > > > [Non-text portions of this message have been removed] > > > > -- > The goal of science is to build better mousetraps. The goal of nature > is to build better mice. > Come and chat with me at #quietzone on irc.newnet.net > > > > > [Non-text portions of this message have been removed] > -- The goal of science is to build better mousetraps. The goal of nature is to build better mice. Come and chat with me at #quietzone on irc.newnet.net [Non-text portions of this message have been removed] ------------------------------------ Send any questions regarding list management to: [EMAIL PROTECTED] To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/[email protected]/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Groups Links __________ NOD32 3615 (20081115) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com
