I think I mae that comment; was brain storming.
Short of breaking up concrete, I'd like to get that pipe out and work with 
what I have.





On Sun, 28 Jun 2009, Dale Leavens wrote:

> Don't know, someone mentioned jamming something down into the pipe and 
> turning it to free the inner pipe. Sounds something like a cork screw sort of 
> approach. I would think the ovoid portion of the upper end would not extend 
> far down into the hole so it could be possible to get it turning.
>
> Is it important to you to be able to remove the post? If not I would go for a 
> permanent solution.
>
>
>
> e
>  ----- Original Message -----
>  From: Spiro
>  To: [email protected]
>  Sent: Sunday, June 28, 2009 6:50 AM
>  Subject: Re: [BlindHandyMan] clothes line pole
>
>
>
>
>
>  thanks, what is the corkscrew tool called, and where might one find it?
>  I was just imagining when I wrote that.
>  thanks for the strength info as I was nearing the solid as a quick
>  solution.
>  I'm thinking two part, that will still go into the ground.
>  Inner pipe of cement, outer pipe to hold,and upper inner just as pipe.
>
>  On Fri, 26 Jun 2009, Dale Leavens wrote:
>
>  > I have read many of the messages connected with this. You will know that a 
> pipe is much stronger and more rigid than a solid bar. It can of course be 
> strengthened with a non-compressible filling like cement and running a little 
> rebar through the cement will make it even more rigid. Several years ago I 
> installed a pole for holding up a basketball hoop for my son. It is a four 
> inch diameter pipe, well two actually, one inside the other made that way to 
> shorten it for shipping. I formed a box 18 inches square and about a foot 
> deep from plywood, removed a few patio lock stone bricks and dug a hole to 
> set the box into using it to form up cement. The pipe was set into this and 
> the pole filled with cement which I tamped down very firmly every few inches 
> as per assembly instructions. It stands still, 15 years later. It wants a 
> little paint especially where the two pipes fit together, I assume because of 
> the dielectric causing some corrosion.
>  >
>  > I would think that a four inch heavy sewer like A B S pipe might work 
> equally well packed firmly with cement. You could form your 'T' for 
> additional lines and it would really hurt to hit with a truck or anything 
> else. this would not be a suitable solution though if you wish to remove the 
> pipe when not in use.
>  >
>  > Getting the old piece out will be very difficult. I like the cork screw 
> solution best, if you can get the beggar to turn you should be able to work 
> it up and out. Otherwise it is probably busting up a square of the pavement 
> and digging it all out.
>  >
>  >
>  > ----- Original Message -----
>  > From: Spiro
>  > To: [email protected]
>  > Sent: Tuesday, June 23, 2009 2:35 PM
>  > Subject: [BlindHandyMan] clothes line pole
>  >
>  >
>  >
>  >
>  >
>  > Hi,
>  > I have a ?heavy? metal pipe with a 4 spike cap that is used for a clothes
>  > line.
>  > My neighbor across the drive likes his alcohol consumtion; and he has quie
>  > dented another neighbor's fence. He got a big SUV and ran down the pole.
>  > It is bigger and heavier than the 2.5 inch in our chain link fence in
>  > front.
>  > But I've not measured it yet.
>  > Here's what I want to do; check it out and let me know if I'm on the right
>  > track.
>  > There's a pipe in the ground, cemented and flush with the driveway. The
>  > pipe with the 4 spike cap, fits down into that. Part of this is broken off
>  > into the bigger pipe.
>  > Somehow I have to get that out.
>  > I then want to get a piece of the same size, 2ft down and 2ft above ground
>  > and cement it. I'd like to then get the same size as the pipe that is in
>  > the ground, and cement that. I could then drop the final clothes pole into
>  > that and have cement and double piping up to about 4ft and make it more
>  > durable and memorable than the one he destroyed by driving 5 feet onto my
>  > driveway and breaking it for me.
>  > Wife says that hang dry is faster, and is obviously cheaper; so I need a
>  > very durable solution.
>  > Wife wants to wimp and drag a solitary standing unit in and out every day.
>  > Not good enough for me.
>  > Thoughts, advice, help?
>  > Thanks
>  >
>  >
>  >
>  >
>  >
>  > [Non-text portions of this message have been removed]
>  >
>  >
>
>
>
>
> [Non-text portions of this message have been removed]
>
>

Reply via email to