To all you knowledgeable people, I'd like some advice please. My washing machine got rather dramatically ill this afternoon. I don't believe I'm up to repairing it myself but if anyone can help me to understand what is happening before I have to deal with a repair person I'd feel a lot better. (Especially since the person I usually hire is not available.)
I have an apartment sized World Pool, about eight years old. It has a permapress setting that I was using today when this started. In this setting it fills, swishes for a bit, partially drains, refills and then continues through the cycle. During the rinse (fortunately I was nearby) I noticed that it hadn't done the partial drain, and now it was filling again. Its been a while since I used that setting so I thought maybe I had missed remembered. Well it kept filling and while I did realize something was wrong fairly quickly unfortunately not before the blasted thing over flowed. I got it draining and began the clean up. I mainly used towels and hoped that if I used a different setting all would be well. So I put the towels in. It began normally, filled to the right level, started to move, than stopped and started filling again. I've tried it on a variety of settings, unplugged it and replugged it (I learnt to my horror last summer that its most expensive little part is a computer chip so thought a sort of reset might help), but every time I try to restart it it wants to keep on filling. Any thoughts? Sorry for the novel, ... didn't think there was a point in half the story! Yours sincerely, Joy Please take a few moments to browse and enjoy my original artwork at: www.tigerfeathers.ca [Non-text portions of this message have been removed]
