Hello, I have one of the same units and my remote unit will work for a few 
days and then it stops working.I then remove batteries from both the remote 
unit and the clock and then it will work again for a few days. I just tossed 
the remote gadget in the drawer.
----- Original Message ----- 
From: "Alan & Terrie Robbins" <[email protected]>
To: <[email protected]>
Sent: Tuesday, September 22, 2009 5:23 AM
Subject: RE: [BlindHandyMan] Remote sensor for Temperature


Lee,

Sounds like you have a hard wired one?  What I'm referring to is a wireless
remote sensor. Of course the questions for both remain, can they be replaced
separate from the unit?  Let's see what the knowledge base of this group
comes up with

thanks
Al
  -----Original Message-----
  From: [email protected]
[mailto:[email protected]]on Behalf Of Lee A. Stone
  Sent: Monday, September 21, 2009 10:47 PM
  To: [email protected]
  Subject: Re: [BlindHandyMan] Remote sensor for Temperature



  I am interested on what information you get and add to this my
  question canone cut and splice the cord that runs to the sensor? I
  did not realise my family set my machine up with the wire going
  between the door frame and a solid steel door. well now the wire is
  near stripped. I hate to just buy a new one if I can cut and splice
  the wires or wire. thanks.Lee

  On
  Mon, Sep 21, 2009 at 08:04:34PM -0400, Alan & Terrie Robbins wrote:
  > Good evening,
  >
  > Couple of weeks ago , I queried the list regarding the periodic failure
of
  > my remote temperature sensor that is part of my time/date/temperature
clock.
  > I got the unit last December and up until this August the unit performed
  > flawlessly. The suggestions you folks provided last week (Max & Phil)
were
  > helpful but at this point I have to reset the system daily. This
involves
  > going outdoors and dismounting the sensor, bringing it inside and
  > disassembling it, and then removing the batteries from it as well as the
  > main unit to reset it all. I believe there is something wrong with the
  > sensor. Has anyone ever replaced just the sensor or do I need to
purchase an
  > entire new unit?
  >
  > thanks
  > Al
  >

  --
  When you have an efficient government, you have a dictatorship.
  -- Harry Truman
  .





[Non-text portions of this message have been removed]


Reply via email to