This is Joseph. The instructions for each model are as follows: Classic: 1. Install your product key: At the Utilities/application program, naviate to the drive/flder/keysoft 7.0 product key (number).exe where the number represents the 5 digit serial number. Hit enter twice. Note that you have to perform these steps after you reset your machine with dots 10203. After few moments, the startup message will appear. Hit enter, and at the completion message, hit enter. 2. Boot loading process: The first process involves initialization. Go to Main Menu and press dots 4-5 (JK) while holding down reset. This will start the upgrade. This will load the .bin file into memory. 3. Upgrading Process: Then, it steps through upgrading your machine. It takes approximatly 25-30 minutes. 4. Reboot and completion: After the upgrade is complete, the BN will restart and the machine will boot to the new version of KeySoft. PK machines: 1. Installing product key: Same as the Classic unit. Before you proceed, you must perform C3+C4+dots 1-2-3 reset. Initialization and startup process: After you have installed the key, at the Utilities/application prompt, navigate to the folder where the upgrade file resides(this should be none directory). Hit enter on the program. Hit enter once more, and the upgrade will start. 3. Reboot and completion: After the upgrade is completed, BNPK will restart and will announce the new version of KeySoft. mPower units: 1. Installing the product key: Same as Classic units. Same reset requirements apply. 2. Boot loading process: At the Main Menu, press reset+dots 4-6 (JL) keys. mPower will show up bootloader on the display. At this prompt, press the letter b (number 2 on QT). After a sound is heard, press Reset+dots 4-5 (JK). The upgrade should start. 3. Upgrade process: It'll take approximately 10 to 15 minutes to upgrade your unit. 4. Reboot and completion: After the upgrade, KeySoft will restart and will announce the new version. I hope this information may help you.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sarah Cranston Sent: Friday, March 10, 2006 10:04 PM To: Braillenote List Subject: re: [Braillenote] I'm relieved! There are excellent upgrading instructions on the HW website: www.HumanWare.com/7_0 This includes the exact steps for installing the product key. There is also a step in there somewhere involving pressing the number 2 right after one of the resets. I can't remember all the details, it's been a while since I installed the update. If you still don't want to try this without tech support's assistance, I understand. But if you want to try again this weekend, I'll send you the instructions privately. > ----- Original Message ----- >From: "Terri Pannett" <[EMAIL PROTECTED] >To: "BrailleNote List" <[email protected] >Date: Fri, 10 Mar 2006 21:34:51 -0800 >Subject: [Braillenote] I'm relieved! >Dear List, >I just wanted to let you know I have got my BN up and running. I had >already tried the service reset and it hadn't worked, but after reading >Bob's post, I tried it once more and it worked! >I'm going to wait till Monday and then have Tech Support walk me through it. >Thanks again, all! >Terri, Amateur Radio call sign KF6CA. Army MARS call sign AAT9PX, >California >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
