Hi all. I'm new to this list, as I only got my Braille Note Mpower within the last couple weeks. I'm still trying to get used to its many features, and I'm still setting up the Braille Note to work with my existing devices. I've come across a problem with my Juliet Pro-60 when trying to emboss docs from Braille Note, but I haven't been able to track down the issue on my own yet.
I've read through the Braille Note's manual on setting up embossers, gone through the embosser setup procedure, and made tripple sure I've matched the settings with my Juliet. I'm still having issues getting the Braille Note to emboss interpoint. I've run print test docs directly from the Juliet to make sure there's not a hardware problem, and it's embossing perfectly, so it's got to be a setting I've messed up or missed somewhere. I've got the Mpower's embosser settings as follows: Paper Length: 25 Paper Width: 33 (I'm using 8-1/2 by 11 embosser paper) Use Form Feeds Between Pages: yes Pause After Each Page: no Emboss Both Sides of Page: yes Page Offset: 0 Embosser Braille Table: Keysoft 6-dot english braille table.ebt Embosser Port: serial Baud Rate: 9600 Parity: none Number of Data Bits: 8 Handshaking: software Any ideas why I can't emboss interpoint? TIA There is nothing more exhilarating than to be shot at without result. Sir Winston Leonard Spencer Churchill Jason Symes Visit my web site at: http://home.mchsi.com/~jsymes for screen-reader friendly apps, games, and much more! ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
