Hi Cindy,
There has been much discussion about how to use the M-power to emboss
documents. There isn't a problem with the older Braillenote units since
they have a parallel port. That works! The easiest way to emboss with the
M-power to your Romeo is through the serial port. I wrote a post about this
some time ago and if I find it, I'll pass it along. I wrote out how to set
up the BN and the Romeo Embosser. If you want a parallel port solution,
then I'd recommend getting the bluetake Bluetooth adapter from Enabling
Technologies. There is also an infrared port adapter which I purchased
through them as well and that works reasonably well. Once you figure out
how you want to interface your Romeo to the M-power, you have a wonderful
system for embossing documents. Please let me know which specifics you want
me to elaborate on and I'll do so.
Jim Aldrich
----- Original Message -----
From: "slerythema" <[EMAIL PROTECTED]>
To: "'Braillenote List'" <[email protected]>
Sent: Saturday, August 19, 2006 1:52 PM
Subject: RE: [Braillenote] Embossing / setup
A used Romeo 25 that I got off ebay. I wouldn't think it would be the
embosser because I never get to the point of setting up the embosser.
Also, I have actually used the emboser with my PC. I'm trying to determine
if it is embosser accurately. The only thing I had on the PC was Kurzweil
1000 and the embosser spit out extra things that might be format markings.
I downloaded the manual for the embosser and reset it to factory settings so
I thought I would try it with the mPower to see if I can get something
embossed that does not contain these extra markings. I am trying to see if
everything is okay with the embosser or if I need to have it repaired.
Cindy
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
James Aldrich
Sent: Saturday, August 19, 2006 1:00 PM
To: Braillenote List
Subject: Re: [Braillenote] Embossing / setup
Cindy,
Which embosser do you have?
Jim Aldrich
----- Original Message -----
From: "slerythema" <[EMAIL PROTECTED]>
To: "'Braillenote List'" <[email protected]>
Sent: Saturday, August 19, 2006 10:24 AM
Subject: [Braillenote] Embossing / setup
>I am trying to setup a new embosser and want to emboss a test.
>
> BNQT version 7.0
> Serial interface
>
> 1. open keyword
> 2. create a document
> 3. type a test sentence (have saved the file as a word doc
and keyword
> braille)
> 4. keyword menu
> 5. emboss or print a document
> 6. emboss menu setup embosser, enter
> 6. which folder>my favorites highlight the file and press enter
> 7. error could note open computer braille table
>
> What am I doing wrong? I need to get to the setup menu for
the embosser.
>
> Cindy
>
>
> ___
> To leave the BrailleNote list, send a blank message to
> [EMAIL PROTECTED]
> To view the list archives or change your preferences, visit
> http://list.humanware.com/mailman/listinfo/braillenote
>
>
>
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
