Try a different DS card, I used the one the 7.0 upgrade was on, I had this particular problem last July with the 7.1 upgrade, tried two of my own cards but apparently although I was issuing the command they were not formatting to FAT16. Used the 7.0 card and it was done in minutes.
Rose Combs [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of terry Sent: Wednesday, September 06, 2006 4:25 PM To: 'Braillenote List' Subject: [Braillenote] Can't install 7.2 Ok folks and I know there are a lot on here who know more about this than me. In any case.. 1. prepared sd for installation. 2. installed successfully my key. 3. downloaded the proper bin file and loaded on sd card. 4. as per instructions pressed dots 4 and 5 along with reset. 5. tones started. 4. no matter what I do I always get an sd card error. I do not believe that the sd card is in fact at fault. it worked fine to install the key and when I did the prepare. I have used it for earlier version upgrades as well and it is a dedicated card. any insight would be most welcome. ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
