Greetings,
I don't have the e-mail address for the person at humanware that
is dealing with the manual so I'm sending this to the list
figuring someone with Humanware will take note. No need for any
replies to the list.
I was browsing through the manual to see what I've missed, and
ran across the following topic.
My comments are at the end:
1.17.3 Start-up Braille and Speech Mode.
The BrailleNote PK may be forced to start in one of three modes
when it is switched on. You may choose to start with Braille
only, speech only, or both Braille and speech.
This feature is very convenient if, for example, you have
previously been using both Braille and speech, but you are now
attending a meeting and for privacy you wish to start in the
Braille only mode.
As you turn on the switch, simply hold down one of the
following key combinations:
Speech only: dot 2;
Braille only: dot 3;
Speech and Braille: both dots 2 and 3.
I was curious, so I tried this.
It doesn't work as written.
However, if you turn the PK off while holding down one of the
keys, or key combinations, then turn it back on holding that same
key or key combination, it works fine.
Richard Turner
"It is easy to fly. You simply throw yourself at the ground and
miss." -- Douglas Adams
e-mail: [EMAIL PROTECTED]
web page: www.turner42.com
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
