Hi,

Is a problem with a key, perhaps.  I could connect with my wireless router 
without doing anything special, but mine is an open configuration.  It doesn't 
sound like it's a problem with your router though.

Take care,
Lois

----- Original Message ----- 
From: Sharonda Greenlaw 
To: Braillenote List 
Sent: Wednesday, January 17, 2007 10:10 AM
Subject: Re: [Braillenote] Router Help


Tom,
You are correct in saying that I have a PC plugged up to the router.
Everything is fine on that end. It connects with no problem.

It's the BN and the router that don't like each other. The last time I
had this problem, with my old router (it's no in my mom's house), the
problem was that I didn't have it set to "Mixed" mode. I made sure to
do this. I even now have the DNS information.

I have done a reset on the BN, but I get  nothing. It connects but
says it can't find the server. I am truly frustrated.

All help in this matter is really appreciated.
Sharonda

On 1/17/07, Tom Lange <[EMAIL PROTECTED]> wrote:
> Hi Sharonda,
> I'm going to assume that you also have a PC hooked up to the router as well.
> When you try connecting to the web with your PC, do pages load properly?  If
> not, then you need to look at the router's configuration.
>
> I've had this problem with my BN and my WRT54G router on several occasions.
> After wracking my brain and fiddling around, it turns out that a simple
> standard BN reset did the trick.  It's really the router that needs to worry
> about the availability of a static DNS, gateway address, et cetera, and any
> parameters concerning the host configuration will be passed to the BN via
> what's called DHCP.
>
> Try doing the reset; hopefully that will spare you further grief and
> aggravation.
>
> If not, give us a shout.
> Good luck.
> Tom
>
>
> ----- Original Message -----
> From: "Sharonda Greenlaw" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Wednesday, January 17, 2007 5:32 AM
> Subject: [Braillenote] Router Help
>
>
> > Hi all,
> > I'm trying to connect my BNBT MPower to my new Linksys WRT54G router.
> > I'm not sure what is wrong.
> >
> > I've got it set to mixed mode. I've got the WEP key there. It's set to
> > obtain an IP address automatically. I don't know what else to do. It
> > connects but says it can't find the server. Can anyone give me some
> > recommendations? Thanks.
> > Sharonda
> >
> > --
> > Come, read and take a journey with me at
> > www.WorldOfShariG.blogspot.com
> >
> > ___
> > To leave the BrailleNote list, send a blank message to
> > [EMAIL PROTECTED]
> > To view the list archives or change your preferences, visit
> > http://list.humanware.com/mailman/listinfo/braillenote
> >
>
>
> ___
> To leave the BrailleNote list, send a blank message to
> [EMAIL PROTECTED]
> To view the list archives or change your preferences, visit
> http://list.humanware.com/mailman/listinfo/braillenote
>
>


-- 
Come, read and take a journey with me at
www.WorldOfShariG.blogspot.com

___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote

Reply via email to