Derek, Whilst I haven't a particularly technical explanation, braille display issues generally are the effect of defective backplanes. Holding a cursor routing key at startup will often re-engage the display again. Sam
-----Original Message----- From: Derek Roberts [mailto:[email protected]] Sent: Friday, 23 April 2010 1:12 PM To: Sam Taylor; [email protected] Subject: Re: [Braillenote] Braille Display Not Mperating Error... Hey, Didn't know holding down a cursor key did anything. What's it do? Thanks, Derek Roberts, KJ4UFX. On 4/22/10, Sam Taylor <[email protected]> wrote: > 1. Plug in AC adaptor (extremely important) 2. Remove all cards 3. At > main menu, perform a service reset. > 4. Erase the entire dictionaries folder but after the folder erased > message pops up, do not go back to the main menu. Remain in folder > manager where the unit left off. > 5. Press the reset button, but immediately after the reset beep is > heard, press and hold a cursor router key until "operating language?," > appears > on the display. If it comes up brl display not operating again, > continue to hold router key and perform another reset. > 6. Enter through the factory defaults until the main menu is reached. > 7. Erase the keysoft.ksd file from the dictionary folder and press > reset by itself after "1 file erased," message is heard. Note: do not > go back to the main menu after erasing the ksd file. > You will now notice that "operating language," is showing up in > braille and the display has been restored temporarily. > Note this is not a permanent fix and the unit will most likely need > servicing. > > Sam Taylor > Blindness Products Consultant > HumanWare > Suite 2, 7-11 Railway St, > Baulkham Hills NSW 2153 > Ph: 02 9686 2600 > Fax: 02 9686 2855 > Mob: 0420 805 282 > Email: [email protected] > http://www.humanware.com > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Dominique > Sent: Friday, 23 April 2010 11:54 AM > To: Braillenote Mailing List; Robert Cummings > Subject: [Braillenote] Braille Display Not Mperating Error... > > Hi all, just like the subject said: I have a friend whose > BrailleNote's display is not working. We did the Jkl reset dot's > 1-2-3. We also have tryed dot's 4-5-6 and reset. The last one we did > was the one you shouldn't do, the "eraceing the Ksaid file in the > dictionary. Pressing record and reset at the same time." > Still getting the "the Braille display is not operating." > message. What should we do? > > > > Check out my site at: > http://muztech.podzone.org > GoogleTalk ID: [email protected] > > Skype: > raywonder1 > UK free Ring2Skype number: in London: 44-203-355-3158 extension to > inter is 800 U.S number: in Nyc: Manhattan number: 1-646-843-6973 > Extension to inter is 292 Houston Texas number... 1-832-365-6620 > Extension to inter is > 268 > Mobile number: 281-301-5784... > Keysoft CE version 8.0 built 20 > BRAILLENote mPower user, BT 32 > > ___ > Replies to this message will go directly to the sender. > If your reply would be useful to the list, please send a copy to the > list as well. > > To leave the BrailleNote list, send a blank message to > [email protected] > To view the list archives or change your preferences, visit > http://list.humanware.com/mailman/listinfo/braillenote > > > ___ > Replies to this message will go directly to the sender. > If your reply would be useful to the list, please send a copy to the > list as well. > > To leave the BrailleNote list, send a blank message to > [email protected] > To view the list archives or change your preferences, visit > http://list.humanware.com/mailman/listinfo/braillenote > > ___ Replies to this message will go directly to the sender. If your reply would be useful to the list, please send a copy to the list as well. To leave the BrailleNote list, send a blank message to [email protected] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
