After active sync is unchecked, shut computer down. Turn on BN put in terminal mode before you boot computer.. Boot your computer. If the braille does not show, make sure your com port is set correctly in your screen reader settings. In JAWS the setting is under braille. Remember if you change the com port you have to unload JAWS and reload it. If you need more help you can write me off line at [EMAIL PROTECTED] -- Region V Technology Consultant
-------------- Original message from "Ben Blagg" <[EMAIL PROTECTED]>: -------------- > I only have one serial port. I unchecked it in Active Sync. I reset the > BN, I rebooted the computer put the BN in braille terminal mode, once there > I entered to give myself a blank screen. At that point I rebooted the > computer but still I have a blank screen on the BN. > ----- Original Message ----- > From: "Jane Jordan" > To: "Braillenote List" > Sent: Tuesday, November 30, 2004 7:54 PM > Subject: Re: [Braillenote] I must be doing something wrong; > > > > You did it in reverse. Maybe I wans't clear. You connect toeh > braollenote > > to the PC put it in Terminal mode *then* shut down jaWS or rebot the > > computer. > > > > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.289 / Virus Database: 265.4.3 - Release Date: 11/26/04 > > > ___ > To leave the BrailleNote list, send a blank message to > [EMAIL PROTECTED] > To view the list archives or change your preferences, visit > http://list.pulsedata.com/mailman/listinfo/braillenote >
