I bought a Brewtus II in October 2007. It did not come with a
bottomless portafilter. When I ordered the Brewtus II, I actually
asked them if it could include a free bottomless portafilter and they
said "no".

About 6 months later I ordered a bottomless portafilter from them and
paid for it. That was probably a mistake since I discovered 3 months
later, that their bottomless portafilter would not accept a triple
basket. I didn't realize that I wanted a triple when I ordered their
portafilter. For the same price, I could have bought a bottomless
portafilter from either Chris Coffee or espressoparts.com that would
have included a triple. My mistake.

On Dec 21, 12:17 pm, "Chris Bailey" <[email protected]> wrote:
> Well, that was my impression.  About a month after I got my machine, I got
> another package from WLL that had the bottomless PF and a few other bits.  I
> wasn't expecting it, but they emailed me saying it was part of the package
> and just hadn't been in stock when I bought my machine.  I thus assumed it
> was part of the package, maybe the WLL rep who follows the list can clarify.
>
>
>
>
>
> On Sun, Dec 21, 2008 at 8:22 AM, Ben McCafferty <[email protected]> wrote:
> >  Really?  I never got one, and also bought the Rancilio (which is a really
> > nice one) from Chris Coffee.
> > bmc
> > "Faith will move mountains, but you'd better bring a shovel....."
>
> > ------------------------------
> > *From: *Chris Bailey <[email protected]>
> > *Reply-To: *<[email protected]>
> > *Date: *Sun, 21 Dec 2008 00:21:31 -0800
> > *To: *<[email protected]>
> > *Subject: *Re: Help
>
> > Unless they've changed it, when you buy a Brewtus from WLL, they'll include
> > a bottomless PF.  Mine came later, and I wasn't aware of this, so I bought
> > the Rancilio bottomless PF that you can get from Chris Coffee.  It fits
> > fine, and is actually what I'm using right now.  I do prefer that it sits
> > more flush on my tamp stand when tamping.  It is heavier than the Expobar
> > one, and locks in at a different spot, but seems to work fine.  Check the
> > mailing list, there was a thread on this just a week or two ago.
>
> > On Sun, Dec 21, 2008 at 12:09 AM, mariowar <[email protected]> wrote:
>
> > I just sold my Silvia  and I am waiting for an even better from WLL by
> > December 24th.
>
> > Any recommendations for a bottomless portafilter for this machine? I
> > have not found any Expobar naked portafilter....anywhere.
>
> > Any idea how to descall this machine?
>
> > Thank you and soon  I will be part of the Brewtus family.
>
> > On Dec 20, 11:51 am, "Ray Sachs" <[email protected]> wrote:
> > > I also upgraded from Silvia to Brewtus II last summer. Transition
> > couldn't
> > > have been smoother.
> > > Yes, you can brew and steam at the same time. I generally do them back to
> > > back rather than simultaneously, but the main thing is there's no waiting
> > > for the temperature to adjust between the two.
>
> > > The steam power is awesome compared to the Silvia. Others seem to like
> > tips
> > > other than the stock 2-hole Expobar but I've been real happy with that,
> > even
> > > for the occasional experiment with latte art. Its much faster than the
> > other
> > > one and two hole tips I tried with smaller holes. And if you work it, you
> > > can still get good micro-foam.
>
> > > I tend to fill the reservoir and empty the tray daily just out of routine
> > > but have gone  2-3 days when I've forgotten. Also about 3-4 drinks a day,
> > > usually all but one are milk drinks. Filling the reservoir is easier than
> > on
> > > the Silvia because its located along the side and I don't have to slide
> > the
> > > machine out from under a cabinet. I just use a funnel to hit the opening
> > in
> > > the top and I don't have to do anything except pull the warming tray off.
> > > The drip tray is HUGE relative to what you're used to - its like having
> > > another sink down there. I empty every couple of days, but could go
> > longer
> > > easily.
>
> > > I haven't had to repair anything yet, but the repairs on the Silvia were
> > > never too difficult, so hopefully neither will the Brewtus - I don't see
> > > myself shipping this beast back to WLL.
>
> > > I upgraded the grinder too (to a Macap), but used the Rocky for a few
> > weeks
> > > at first. Not bad, but the Macap is definitely better, particularly the
> > > stepless. But you should be fine until you decide you're not :)
>
> > > Good luck and enjoy!
>
> > > -Ray
>
> > > On Fri, Dec 19, 2008 at 12:43 PM, mariowar <[email protected]> wrote:
>
> > > > I have some questions regarding the Brewtus III.
>
> > > > How is the steam power compared to Silvia?
>
> > > > Would I be able to steam and brew at the same time?
>
> > > > Drinking for cappas a day, how often do i have to fill the reservoir?
>
> > > > I have the general dimensions, however I would like to have the
> > > > dimension of the water tray + body, I understand the tray is huge.
> > > > Does the height of the machine included the rubber legs? ) long o
> > > > short ones?)
>
> > > > Do you think that the Brewtus+ Rocky area good match? ( that is the
> > > > grinder that I have.)
>
> > > > Have any of you transitioned form Silvia to Brewtus, was it smooth?
>
> > > > I have reading some issues regarding the reliability of the machine,
> > > > however I have read too that WLL technical service is good, is that
> > > > true?
>
> > > > One of my fears is to have to ship the machine back to seller ro be
> > > > repaired. If that is the case do you think that the most common fixes
> > > > can be done remotely?
>
> > > > Thanks- Hide quoted text -
>
> > > - Show quoted text -
>
> > --
> > Chris Bailey
> > [email protected]
>
> --
> Chris Bailey
> [email protected] Hide quoted text -
>
> - Show quoted text -

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/brewtus?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to