I was told by tech support today that Todd S. will post it here first when the pid is available. Should be fairly soon. **
On Jan 20, 1:56 pm, sink cut <[email protected]> wrote: > Does anyone know what this involves or if the parts are even > available? > > I was looking at putting my own PID mod on my B2 but I would prefer > to make it like a B3 instead. > > I have recently been testing my shot temp from the B2 and have > consistently noticed a 3 degree (celcius) difference in water comming > from the group depending on the stage in the brew element cycle. > i.e. if my set temp is 92 the water comming from the group after a 3 > ounce rinse is 95.0c just after the element turns off, and, 91.8c > about 5 mins later just before the element comes on again. > > I have read that the GICAR pulses the element meaning that overshoot > will be minimal and the difference mentioned above will be > eliminated. > > I am still very happy with my B2, I just want to eliminate another > uncontrolable variable from my espresso routiene. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
