sounds good- hope it applies to Ozzies too!
On Jan 21, 5:02 pm, BinBakinBeans <[email protected]> wrote:
> I was told by tech support today that Todd S. will post it here first
> when the pid is available. Should be fairly soon.
> **
>
> On Jan 20, 1:56 pm, sink cut <[email protected]> wrote:
>
> > Does anyone know what this involves or if the parts are even
> > available?
>
> > I was looking at putting my own PID mod on my B2 but I would prefer
> > to make it like a B3 instead.
>
> > I have recently been testing my shot temp from the B2 and have
> > consistently noticed a 3 degree (celcius) difference in water comming
> > from the group depending on the stage in the brew element cycle.
> > i.e. if my set temp is 92 the water comming from the group after a 3
> > ounce rinse is 95.0c just after the element turns off, and, 91.8c
> > about 5 mins later just before the element comes on again.
>
> > I have read that the GICAR pulses the element meaning that overshoot
> > will be minimal and the difference mentioned above will be
> > eliminated.
>
> > I am still very happy with my B2, I just want to eliminate another
> > uncontrolable variable from my espresso routiene.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Brewtus" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/brewtus?hl=en
-~----------~----~----~----~------~----~------~--~---
