I'm sure they do. Try Todd Salzman or Gary Salzman directly--especially Todd tends to be pretty active on this list. [email protected] and [email protected]
Take care, bmc "Faith will move mountains, but you'd better bring a shovel....." > From: Josh Heisler <[email protected]> > Reply-To: <[email protected]> > Date: Sat, 7 Feb 2009 07:57:18 -0800 (PST) > To: Brewtus <[email protected]> > Subject: Re: New Brewtus III Steam Tip > > > Hi Ben, > I've been reading your posts and I want to thank you for the excellent > advise. I bought the 2 hole Isomac based on your advice from another > thread and I'm waiting for that to come in the mail. But I'm > interested in experimenting. I'm new to all of this. At the class I > took I did pretty well in getting microfoam but it was on a very high > end professional machine. I'm hoping I can do something approximating > that. And I soon I hope to do the latte art. > > Regarding the new expobar tip, you mention that you intend to try it. > Do you have any idea if WLL sells it? I've yet to hear from them > through email. Perhaps I should just give them a call. > > Josh > > On Feb 7, 10:21 am, Ben McCafferty <[email protected]> wrote: >> Hey Josh, >> Just for clarification--the stock 2-hole tip is the one that I don't think >> works well. The 1-hole is actually a very decent tip--balanced and a good >> compromise between speed and fine foam. I've yet to try the new one, but >> will do so soon. I think it's a 1-hole, and the difference is that it is >> tapered to a point, which is supposed to introduce air more readily without >> turbulence under the tip itself. >> tx, >> bmc >> "Faith will move mountains, but you'd better bring a shovel....." >> >>> From: mariowar <[email protected]> >>> Reply-To: <[email protected]> >>> Date: Fri, 6 Feb 2009 21:09:35 -0800 (PST) >>> To: Brewtus <[email protected]> >>> Subject: Re: New Brewtus III Steam Tip >> >>> Josh, I have no previous experience with older models. >> >>> The Brewtus lll comes with a new medium sized one hole tip which I >>> found perfect to get microfoam every time. >> >>> I understand that Brewtus ll had a 2 hole one, therefore, you have >>> nothing to lose trying this one. >> >>> On Feb 5, 5:08 pm, Josh Heisler <[email protected]> wrote: >>>> Hello, >>>> I've been reading the discussions here on and off for a few months. I >>>> bought my Brewtus II in Sept. Wish WLL had warned me that a new one >>>> was coming out. Anyway I just took a class in milk steaming yesterday >>>> and feel like I have a handle on microfrothing. But from what I've >>>> read, particularly from Ben, the stock tip does not live up to the >>>> task. I saw that someone asked about the new tip for the Brewtus III >>>> on another thread but WLL's response was unreadable. And I emailed >>>> them today but have yet to hear back. Can anyone speak from experience >>>> if the new tip is an improvement? And how many holes does it have? >> >>>> What is the best tip I can get currently to microfroth? I read earlier >>>> about some attachments. But would love to stick with something that is >>>> easy to attach. >> >>>> Much appreciated, >> >>>> Josh > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
