Carl, Is the machines pressure gauge going into the red zone? You may need to turn down the pressure stat. It may be overheating and tripping the high limit switch. See the attached directions. Please let us know if you need further assistance.With Regards,The Technical Support Department [email protected] -----Original Message-----From: "wiseguy" [[email protected]]date: 06/26/2009 06:08 PMTo: "Brewtus" Subject: Re: Pump Won't Run.... After my BII (plumbed supply) is fully warmed, I notice that pump won't start while drawing hot water for an Americano. Sometimes the Tstat breaker atop the seam boiler pops off and needs resetting (small red button/rod- dry boiler?). The electrical spade connections are tight. All is well until the unit is fully hot and has made several shots. My guess is that water level controller is funky. Your thoughts are greatly appreciated. Thanks, Carl --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
BREWTUS p-stat adjustment (3 wire).doc
Description: MS-Word document
