I suspect a 8mm will work quite well - that .5mm makes a big difference.
On the bigger question: to the best of my knowledge, no Expobar machine uses a *genuine* E61 group head (I believe they are actually quite rare outside of Faema machines). Most of we call E61 groups these days are clones or variations. Cheers Neil A. Blue Mountains, Oz http://minstrygrounds.net.au - A blog about selecting, roasting and drinking fine coffee __________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Barry Luterman Sent: Monday, 17 August 2009 4:56 AM To: [email protected] Subject: Re: Sorting out an Office I found a 7 mm but it's for an Astoria Don't know if it will fit http://www.espressoparts.com/cgi-bin/ep.pl?pgm=co_disp <http://www.espressoparts.com/cgi-bin/ep.pl?pgm=co_disp&func=displ&strfnbr=7 1&prrfnbr=5812&sesent=0,0&search_id=8914> &func=displ&strfnbr=71&prrfnbr=5812&sesent=0,0&search_id=8914 On Sun, Aug 16, 2009 at 7:57 AM, Ben McCafferty <[email protected]> wrote: Yeah, Chris has 8, 8.5 or 9. Any leads on a 7.5 or 7? bmc "Faith will move mountains, but you'd better bring a shovel....." > From: Ira <[email protected]> > Reply-To: <[email protected]> > Date: Sun, 16 Aug 2009 10:19:45 -0700 > To: <[email protected]> > Subject: Re: Sorting out an Office > > > At 08:43 AM 8/16/2009, you wrote: >> --Is there a 7 or 7.5mm gasket available out there? > > There are thinner ones, I have an 8 in mine I think. > > Ira > > > > <br --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
