Dear JJ. sometimes they can pop at random. if it does it once or twice more then I'd look at the root cause:
either an overly sensitive 'button' or an actual overrtemp condition. Dave On Aug 24, 10:00 pm, JavaJo <[email protected]> wrote: > Hello Zolt! > > I have no idea why the button popped. I just replaced the pressure > stat regulator recently so it is possible that the replacement somehow > triggered the button, although it happened after I'd replaced the > pressure stat. > > After I reset the button, things have been running fine. > > I'm a techie tard. Can you tell? Each time I've had the machine open, > I've checked to see that all of the connections were firmly seated, > that no wires were touching and that the wire covering was not > damaged. > > Thank you for your concern but I really do not know what caused the > button to pop. > > JavaJo the clueless > > On Aug 22, 7:17 am, Zolt <[email protected]> wrote: > > > WHY did the button pop? > > > look to causes. and if there was NOT an overtemp problem -- then > > REPLACE it. > > > On Aug 21, 7:23 am, JavaJo <[email protected]> wrote: > > > > Thank you Kitt. I will try that today. Wish me luck! I'm getting > > > grouchy from lack of espresso! > > > > JavaJo > > > > On Aug 21, 6:12 am, "Kitt Johnson" <[email protected]> wrote: > > > > > I think the "button" under discussion is actually a little red > > > > pencil-lead > > > > sized plastic "stick" that should be poking out of a little pipe ... it > > > > looks like a red plastic ballpoint pen tip poking out. > > > > > If you tip your machine around a lot, they occasionally fall out ... > > > > especially if it has fired off and needs to be pushed back down to > > > > reset. > > > > If you find a little empty pipe hole about the size of a retracted > > > > ballpoint > > > > pen, try sticking a stiff something (skinned half inch of #12 wire (or > > > > a > > > > tooth pick? but don't snap it off) and push it down firmly. That will > > > > reset > > > > it. > > > > > ----- Original Message ----- > > > > From: "JavaJo" <[email protected]> > > > > To: "Brewtus" <[email protected]> > > > > Sent: Friday, August 21, 2009 2:24 AM > > > > Subject: Re: MY BREWTUS IS FREAKING OUT AGAIN! > > > > > Todd, I can't find the reset button. I don't see any button on the > > > > brew boiler. > > > > > JavaJo > > > > > On Aug 20, 9:23 am, "Todd Salzman" <[email protected]> wrote: > > > > > Did you push the reset button on the high temperature shut off on top > > > > > of > > > > > the brew boiler? > > > > > > Todd Salzman > > > > > Whole Latte Love > > > > > -------------------------------------------------------------------------------- > > > > > No virus found in this incoming message. > > > > Checked by AVG -www.avg.com > > > > Version: 8.5.392 / Virus Database: 270.13.63/2317 - Release Date: > > > > 08/21/09 > > > > 06:04:00 --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
