i have used teflon tape on those parts, but i use the yellow thicker version. if you pick out some parts to use for a drain, please share your findings. - Dennis
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of vinalopo Sent: Tuesday, January 25, 2011 11:54 AM To: Brewtus Subject: Re: Add brew boiler drain valve - Brewtus IV (new model) Thank you very much for the advice. one question more: to seal the drain valve would be safe to use plumber's hemp (that I use to prefer to teflon tape) or should I use teflon tape / food / temperature / steam safe liquid sealant? Regards On Jan 24, 5:50 pm, HERMAN <[email protected]> wrote: > be sure to use brass. if you use galvanized fittings you will have trouble. > > ________________________________ > From: Dennis Keating <[email protected]> > To: [email protected] > Sent: Mon, January 24, 2011 11:46:41 AM > Subject: RE: Add brew boiler drain valve - Brewtus IV (new model) > > i don't know of any, but would welcome one. it would be useful when > descaling. - Dennis > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf > > Of vinalopo > Sent: Saturday, January 22, 2011 11:32 AM > To: Brewtus > Subject: Add brew boiler drain valve - Brewtus IV (new model) > > Good afternoon > I have just purchased a Brewtus IV. The machine has no brew boiler > drain valve but it has a plug where I think I could add a microball drain valve. > Does anywone already added the drain valve to the brew boiler? if so, > can you give me some soggestions on parts and install? > thank you > > -- > You received this message because you are subscribed to the Google > Groups "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group athttp://groups.google.com/group/brewtus?hl=en. > > -- > You received this message because you are subscribed to the Google > Groups "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group athttp://groups.google.com/group/brewtus?hl=en. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
