Thank you! I didn't removed the drain plug yet but I have some information more.
The drain plug can be removed via a 17mm metric wrench, there is enough space below the brew boiler to fit a microball drain valve, probably it would be good to screw in the valve a 90º pipe to which connect a nut and the drain valve. Apparently the drain plug is 1/4", in the spare part list (published at http://www.crem.es/recambios/home.php?lengua=en) there is only a male plug, part n. 30000300 more info on the part also here http://www.eunasa.com/en/buscar.php?txtBuscar=30000300. If so I am wondering if I coud fit the following parts: 30000215 (90º pipe, to screw to the boiler) 30100010 (hexagonal nut 1/4) 15000310 (microball drain valve) and maybe, as additional safety "measure" against drain valve likage, some 1/4 cap to screw on the drain valve "exit" I quote expobar part number if you combine expobar and eunasa web sites you can see photos e schematics. Now I just have to source the parts. What is your opinion on my idea? I would really appreciate your and the other group member opinion. And I am also wondering if it could make sense a more sofisticate mod for the steam boiler too. On Jan 28, 1:56 am, Ken <[email protected]> wrote: > do you know the thread type and size? If so I can aid in the search. > I have the new Brewtus IV r too.... > > Ken > > On Jan 27, 2:56 pm, vinalopo <[email protected]> wrote: > > > I am still looking for the valve, as soon as I found it will post > > details on its fitting -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
