Thanks Ira--can you be any more specific on where the screw is on the pump? I'll have another look.
With a vibe pump, I came to understand the paradigm as using the OPV to set brew pressure, i.e. 9 bar. In the case of the rotary, your post makes it sound like I use the screw on the pump to adjust brew pressure, and the opv as a backup? Correct? I'll have a look in the meantime. b On Mar 13, 2011, at 10:11 AM, Ira wrote: > At 09:41 AM 3/13/2011, you wrote: >> Further to yesterday's posts on the rotary upgrade, is there any adjustment >> on the rotary pump that will allow an increase of its max pressure? With >> OPV screwed in all the way, it only attains 8 bar. I prefer 9 bar with the >> blind PF, 8.5 when pulling. > > There should be a screw on the pump to set pressure and the OPV should be set > to 12 or so to actually handle an OPV problem if the pressure relief in the > pump has an issue. > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
