At 12:12 PM 9/1/2011, you wrote:
Is there anything else I should be considering as a likely root cause?
Well, it would seem at first glance that the problem you're having would be caused by to much pressure or a serious grinder problem. If you have a gauge that shows shot pressure and keep track of what it generally does than you should know if it's pressure. Also, if you're sure the grinder is not a problem than it's likely pressure and the OPV is the most likely culprit. The only other common failure items are group gaskets, the screen under the gasket and the pressurestat.
Ira
-- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
