OK, thanks. That helps me have the options in front of me to consider. I already changed the gasket and the shower screen, so it shouldn't be those.
When you say "pressurestat," are you referring to the gauge on the front of the Brewtus I that tells me the pressure of the steam boiler? Or is it something else? Something internal? Thanks again, Marcus On Sep 1, 3:35 pm, Ira <[email protected]> wrote: > At 12:12 PM 9/1/2011, you wrote: > > >Is there anything else I should be considering as a likely root cause? > > Well, it would seem at first glance that the problem you're having > would be caused by to much pressure or a serious grinder problem. If > you have a gauge that shows shot pressure and keep track of what it > generally does than you should know if it's pressure. Also, if you're > sure the grinder is not a problem than it's likely pressure and the > OPV is the most likely culprit. The only other common failure items > are group gaskets, the screen under the gasket and the pressurestat. > > Ira -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
