Asked wholelattelove about that. Measured the resistance across the element, which was normal, according to them.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of 2B Sent: Wednesday, November 02, 2011 11:17 AM To: Brewtus Subject: [Bulk] Re: electrical issue cracked heating element. You need a new one. On Nov 1, 7:46 am, "bonner" <[email protected]> wrote: > My issue is actually with an expobar office lever, but perhaps someone has > ideas. > > My machine has started tripping the ground fault interrupter. This does not > occur immediately, but after perhaps 30-60 seconds. No obvious visible > issues inside. Couple of the plastic covers around the wiring connectors > were heat damaged, but nothing changed when I fixed these. > Any ideas on things to check? > Thanks > bg -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
